柴油發電機組用電控發動機故障診斷的基本流程與技巧

The basic processes and techniques of engine fault diagnosis for diesel generatorThe basic process of electronic controlled engine fault diagnosisThe basic process of electronic controlled engine fault diagnosis

 (1)通過向車主或有關人員的交談，詳細了解故障的產生、發展的全過程，以及過去的故障狀況、檢修狀況和車況等，從而為診斷提供線索，為進一步檢查提出方向。

(1) through to the owner or the relevant personnel of the conversation, a detailed understanding of the fault, the whole process of the development, and past conditions of fault, maintenance condition and condition and other, thus diagnosis provide clues to put forward the direction for further investigation.

(2)直觀診斷。

Visual diagnosis (2).

(3)人工或儀器讀取并驗證故障碼，查清故障碼表示的故障是否存在，即是否故障已排除，而其故障碼仍未清除。

(3) manual or instrument read and verify the trouble code, ascertain the fault code indicates the fault exists, that is, whether the fault has been ruled out. However, the failure code is not clear.

(4)若無故障碼，對有明顯故障征兆的，可用診斷儀、示波器、萬用表等讀取有關發動機數據，進行數值、波形分析；并依據分析結果，檢查有關部件，視需要進行維修或更換。若無明顯故障征兆，則采用癥狀模擬方法對故障進行分析，以進一步檢查故障的原因。

(4) if there is no trouble code, the obvious signs of failure, the available diagnostic instrument, oscilloscope, million meters read about the engine data, numerical, waveform analysis; and according to the analysis results, check the relevant components, depending on the need for repair or replacement. If there is no obvious fault symptom, the symptom of the fault analysis method, to further check the fault.

(5)若有故障碼，則根據故障碼的內容檢查并排除故障。

(5) if fault code, according to the contents of the fault code check and troubleshooting.

(6)重新起動發動機，驗證故障是否已排除。若故障未排除，則繼續檢查故障原因。

(6) to start the engine, to verify whether the fault has been ruled out. If the fault is not excluded, then continue to check the cause of the problem.

美國康明斯發動機維修

Cummings America engine repair

進口康明斯發動機維修

Imported Cummins engine repair

東風電噴康明斯維修

Dongfeng Cummins EFI repair

重慶電噴康明斯維修

Chongqing Cummins EFI repair